-back
to custom RS232 device list
IR to RS232 Codes Output Table for RCV-5000 Infrared Receiver
Feral - Key West QS440/1 Quad Video Switcher| Celadon Inc. | ||
| RCV-5000 IR to RS-232 Output Table | ||
| Device: Feral - Key West QS440/1 Quad Video Switcher | ||
| Infrared Remote Control: Philips PRONTO, Niles Intellicontrol | ||
| Infrared Code Format: NEC - Device ID: 7B02 | ||
| Infrared Pronto Data File(s): See "IR Code Read Me - RCV-5000.txt" for complete description | ||
| Infrared Receiver: Celadon RCV-5000 Infrared to RS-232 Receiver | ||
| RCV-5000 Data File: feral1_r.hex | ||
| Data: 9600 Baud, 8, N, 1, ASCII Output | ||
| Standard Transmit and Receive pinout | ||
| Command | Pronto Button | RCV-5000 Output |
| Set Background Black | 0 | aB+<cr> |
| Set Background White | 1 | aB-<cr> |
| Set Chroma Value - Increment | 2 | aC1+<cr> |
| Set Chroma Value - Decrement | 3 | aC1-<cr> |
| Set Chroma Value - Normalize | 4 | aC1@<cr> |
| Freeze Routine - Freeze ON - CH1 | 5 | aE1+<cr> |
| Freeze Routine - Freeze ON - CH2 | 6 | aE2+<cr> |
| Freeze Routine - Freeze ON - CH3 | 7 | aE3+<cr> |
| Freeze Routine - Freeze ON - CH4 | 8 | aE4+<cr> |
| Freeze Routine - Freeze OFF - CH1 | 9 | aE1-<cr> |
| Freeze Routine - Freeze OFF - CH2 | 10 | aE2-<cr> |
| Freeze Routine - Freeze OFF - CH3 | 11 | aE3-<cr> |
| Freeze Routine - Freeze OFF - CH4 | 12 | aE4-<cr> |
| Hue Value Routine - Increment | 13 | aH1+<cr> |
| Hue Value Routine - Decrement | 14 | aH1-<cr> |
| Hue Value Routine - Normalize | 15 | aH1@<cr> |
| Luminance Value Routine - Increment | 16 | aL1+<cr> |
| Luminance Value Routine - Decrement | 17 | aL1-<cr> |
| Luminance Value Routine - Normalize | 18 | aL1@<cr> |
| Priority Command - ZAP 1 | 19 | aP@0<cr> |
| Priority Command - Channel 1 | 20 | aP@1<cr> |
| Priority Command - Channel 2 | 21 | aP@2<cr> |
| Priority Command - Channel 3 | 22 | aP@3<cr> |
| Priority Command - Channel 4 | 23 | aP@4<cr> |
| Priority Command - ZAP 2 | 24 | aP@5<cr> |
| Recall from EEPROM Routine - Current Channel Setting | 25 | aR@C<cr> |
| Recall from EEPROM Routine - Settings for All Channels | 26 | aR@A<cr> |
| Recall from EEPROM Routine - Initial Settings | 27 | aR@I<cr> |
| Recall from EEPROM Routine - Normal Settings | 28 | aR@N<cr> |
| Recall from EEPROM Routine - Power On Reset Settings | 29 | aR@P<cr> |
| Store to EEPROM Routine - Current Channel Setting | 30 | aT@C<cr> |
| Store to EEPROM Routine - Settings for All Channels | 31 | aT@I<cr> |
| Store to EEPROM Routine - Initial Settings | 32 | aT@P<cr> |
| Store to EEPROM Routine - Normal Settings | 33 | aT@N<cr> |
| Store to EEPROM Routine - Power On Reset Settings | 34 | aT@A<cr> |
| Set Setup Value Routine - Increment | 35 | aS1+<cr> |
| Set Setup Value Routine - Decrement | 36 | aS1-<cr> |
| Set Setup Value Routine - Normalize | 37 | aS1@<cr> |
| Active Channel Select - Matrix OCF | 38 | av0<cr> |
| Active Channel Select - Scaler Channel 1 | 39 | av1<cr> |
| Active Channel Select - Scaler Channel 2 | 40 | av2<cr> |
| Active Channel Select - Scaler Channel 3 | 41 | av3<cr> |
| Active Channel Select - Scaler Channel 4 | 42 | av4<cr> |
| Select and Update crosspoint for MAX456 - input1/output1 | 43 | ax11<cr> |
| Select and Update crosspoint for MAX456 - input1/output2 | 44 | ax12<cr> |
| Select and Update crosspoint for MAX456 - input1/output3 | 45 | ax13<cr> |
| Select and Update crosspoint for MAX456 - input1/output4 | 46 | ax14<cr> |
| Select and Update crosspoint for MAX456 - input2/output1 | 47 | ax21<cr> |
| Select and Update crosspoint for MAX456 - input2/output2 | 48 | ax22<cr> |
| Select and Update crosspoint for MAX456 - input2/output3 | 49 | ax23<cr> |
| Select and Update crosspoint for MAX456 - input2/output4 | 50 | ax24<cr> |
| Select and Update crosspoint for MAX456 - input3/output1 | 51 | ax31<cr> |
| Select and Update crosspoint for MAX456 - input3/output2 | 52 | ax32<cr> |
| Select and Update crosspoint for MAX456 - input3/output3 | 53 | ax33<cr> |
| Select and Update crosspoint for MAX456 - input3/output4 | 54 | ax34<cr> |
| Select and Update crosspoint for MAX456 - input4/output1 | 55 | ax41<cr> |
| Select and Update crosspoint for MAX456 - input4/output2 | 56 | ax42<cr> |
| Select and Update crosspoint for MAX456 - input4/output3 | 57 | ax43<cr> |
| Select and Update crosspoint for MAX456 - input4/output4 | 58 | ax44<cr> |
| Select and Update crosspoint for MAX456 - Return Crosspoint Setting | 59 | ax@? |
| Select and Update crosspoint for MAX456 - Store xpoints to EEPROM | 60 | ax@s |
| Select and Update crosspoint for MAX456 - Recall xpoints from EEPROM | 61 | ax@r |
| Video Control Routine - Video ON | 62 | aV+<cr> |
| Video Control Routine - Video OFF | 63 | aV-<cr> |
| Video Control Routine - Video Status Inquiry 1 on, 0 off | 64 | aV?<cr> |
| Video Control Routine - Video Composite | 65 | aVC<cr> |
| Video Control Routine - Video Component | 66 | aVS<cr> |
| Make Channel Inactive | 67 | aV0<cr> |
| Make Channel Active | 68 | aV1<cr> |
| Celadon, Inc. | ||
| 50 Mitchell Blvd. | ||
| San Rafael, CA 94903 | ||
| Sales: (408) 292-1755 | ||
| Main Tel: (415) 472-1177 | ||
| Main Fax: (415) 472-1179 | ||
| sales@celadon.com | ||
Download the Infrared (IR) Code Files for the Pronto Remotes (.ccf and .pcf)
| Please contact us to inquire about pricing and availability for our remote control products or call our sales and applications engineering staff at (408) 292-1755. |